PLA Calibration Week 1 07/06/20-07/10/20
This week begin with some much needed tuning as the filament being utilized had different properties from what we've been printing with.
Particularly the temperature and retraction settings for PLA were completely different from previous PLA material used.
RH% / Temp in Cabinet
RH% / Temp Test Room
07/06/20
No print test performed on this date.
07/08/20
No print test performed on this date.
PLA Calibration Week 2 07/13/20-07/17/20
RH% / Temp in Cabinet
RH% / Temp Test Room
07/15/20
No print test performed on this date.
PLA Print Test Week 1 07/20/20-07/24/20
RH% / Temp in Cabinet
RH% / Temp Test Room
07/20/20
No print test performed on this date.
07/22/20
No print test performed on this date.
PLA Print Test Week 2 07/27/20-07/31/20
RH% / Temp in Cabinet
RH% / Temp Test Room
07/29/20
No print test performed on this date.
PLA Print Test Week 3 08/03/20-08/07/20
RH% / Temp in Cabinet
RH% / Temp Test Room
08/07/20
No print test performed on this date.
PLA Print Test Week 4 08/10/20-08/14/20
RH% / Temp in Cabinet
RH% / Temp Test Room
08/10/20
No print test performed on this date.
08/11/20
No print test performed on this date.
PLA Print Test Week 5 08/17/20-08/21/20
RH% / Temp in Cabinet
RH% / Temp Test Room
PLA Print Test Week 6 08/24/20-08/28/20
RH% / Temp in Cabinet
RH% / Temp Test Room
08/26/20
No print test performed on this date.
Tags:
adl-3d77,
3d printing,
filament dryer,
filament storage,
3d printing filament,
nylon filament,
pla filament,
extruder,
hotend,
tensile strength,
dry filament,
filament drier,
filament storage container,
filament storage box,
filament dry storage,
1.75 mm filament,
diy filament dryer,
3d printer filament dehydrator,
filament dry box,
filament,
dry filament in oven
