Problem one: Molding, Spoiling, Fading,
Image / Sound Distorting
Problem Solution
Recommend Product
As optical lens, mass media, paper, woodenware, textile, taxidermyKetc. are exposed to more than 60%RH, they tend to suffer the problems as above and cause great damage on article itself and your fortune.
Optical lens & digi-controlling / sensors / processing shall be stored in the condition of 40% ~50% RH or lower in order to avoid molding.
The storage of professional images / media request lower humidity for high-quality & long-term preservation.
Problem Two:
Denaturing, Damages on Food, Bad Quality, Inexact Measurement
Problem Solution
Recommend Product
As food or drugKetc. is denatured by moisture, not only the taste is influenced but our health is harmed. For some costly reagent / assay, they will result in imprecision effect due to excess moisture.
Problem Three:
Oxidation, Corrosion, Aging, Bad Connection, Rusting
Problem Solution
Recommend Product
Hand-made collection, especially for watches, precious metal modelKetc. tend to work abnormally, if they absorb too much moisture, such as break down, bad connection.
< 40% RH is normally demanded.
Some specific opto-electronic devices / parts & materials / chemicals shall be stored in extra-low-humidity condition.
Problem Four:
Delamination, Peeling, Package Cracking, Popcorn EffectsKetc. in Multi-layer PCB, IC Package
Problem Solution
Recommend Product
A lack of proper control MSDs (moisture sensitive devices) will result in internal component damage during SMT (Surface Mount Technology) reflow due to moisture expansion.
20%~40% RH is normally demanded.
IPC / JEDEC standard J-STD-033B indicates MSD (moisture-sensitive devices) stored in <10%RH or <5%RH to elongate floor life.
